DMM HB Brass Offset set 0-6

Brass Offsets are crucial for protecting small flared cracks, often fitting perfectly where nothing else will go. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements. Article-No.: A1700/06
Weight: 85g
Certificates: EN12270:2013 Brass Offset 0 – 4g – 2kN
Brass Offset 1 – 7g – 4kN
Brass Offset 2 – 9g – 5kN
Brass Offset 3 – 10g – 5kN
Brass Offset 4 – 14g – 7kN
Brass Offset 5 – 17g – 7kN
Brass Offset 6 – 24g – 10kN