Juice Technology Charger me, Wallbox (black/silver, 11 kW, 5 m cable, RFID, MID energy meter)

Type: wall box
Colour: black/silver
EAN: 4313042877360
Manufacturer No.: EL-JCME11M
Purpose: For charging electric vehicles
Area of application: inside, outside
Placement: Wall Mounted, Free Standing (Optional)
Voltage: 230 — 400V
Charging power: 11 kW
Charging mode: IEC 61851-1, mode 3
Number of phases: 3
Charging current: 6 — 16 A
Charging point(s): 1 (1x cable with type 2 connector)
: 5 meters
Interface(s): RJ-45, Modbus RTU, Modbus TCP
Access security: RFID
Protection mechanisms: RCD DC 6 mA, temperature monitoring, security lock to protect against theft
Operation: control panel
Display: LEDs (status display)
Housing material: chrome steel, brushed (frame); Polycarbonate glass, UV-resistant (front panel)
IP protection class: 54
Protection class: I
Ambient conditions: -25 — 45 °C
Installation conditions: RCD type A
Feature: Energy meter (MID-compliant), master and slave operation with configurable (up to 250 units)
Funding from KFW: IMPORTANT: The funding must be applied for BEFORE purchasing the charging station! Subsequent submission is unfortunately not possible! The prerequisite for the subsidy is that only electricity from renewable energies is used for the charging stations, e.g. directly from your own photovoltaic system or via an energy supplier. Detailed information on KfW funding can be found on the KfW website.
Further information: Cross-sections that can be clamped: Fine-wire conductor: 6 mm2 — 10 mm2 / 10 — 8 AWG; Cable connection: connection cable type min: 3 x 6 mm2 — L1/N/PE, connection cable type max: 5 x 10 mm2 — L1/L2/L3/N/PE, connection cable O: 16 — 21 mm
Note: A qualified electrician is required for installation, repair or maintenance! This also takes care of reporting to the local grid operator/energy supplier.
Accessories: holder for type 2 connector, 2 pre-programmed RFID cards
Dimensions: Width: 240mm x Height: 240mm x Depth: 120mm
Weight: 6.5kg