UPS APC SRT1500RMXLI-NC uninterruptible power supply () Double-conversion (Online) 1.5 kVA 1500 W

High density, double-conversion on-line power protection with scalable runtime<br>Includes: CD with software, Comms cable, Country-specific detachable power cord, Documentation CD, Installation guide, Network Management Card, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature Probe, USB cable, Warranty card<br><br>Battery failure notification<br>Provides early-warning fault analysis on batteries enabling timely preventive maintenance<br><br>ECO Mode<br>Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection<br><br>LCD graphics display<br>Text and mimic diagrams that display modes of operation, system parameters and alarms.<br><br>Rack/Tower convertible<br>Protects the initial investment in the UPS when migrating from tower to rack-mount environment.<br><br>Temperature-compensated battery charging<br>Prolongs battery life by regulating the charge voltage according to battery temperature.<br><br>Automatic internal bypass<br>Supplies utility power to the connected loads in the event of a UPS power overload or fault.<br><br>Scalable runtime<br>Allows additional run time to be quickly added as needed.<br><br>Hot-swappable batteries<br>Ensures clean, uninterrupted power to protected equipment while batteries are being replaced<br><br>Intelligent battery management<br>Maximizes battery performance, life, and reliability through intelligent, precision charging.<br><br>Automatic restart of loads after UPS shutdown<br>Automatically starts up the connected equipment upon the return of utility power.<br><br>LED status indicators<br>Quickly understand unit and power status with visual indicators.<br><br>Serial connectivity<br>Provides management of the UPS via a serial port.<br><br>InfraStruXure Manager Compatible<br>Enables centralized management via the APC InfraStruXure Manager.<br><br>SmartSlot<br>Customize UPS capabilities with management cards.<br><br>Network manageable<br>Provides remote power management of the UPS over the network.<br><br>Flash upgradeable firmware<br>Install maintenance releases of firmware remotely using FTP.<br><br>Plug-and-Play external batteries<br>Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.<br><br>Rack/Tower convertible<br>Protects the initial investment in the UPS when migrating from tower to rack-mount environment.<br><br>User-replaceable batteries<br>Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)<br><br>Automatic self-test<br>Periodic battery self-test ensures early detection of a battery that needs to be replaced.<br><br>Predictive failure notification.<br>Provides early-warning fault analysis ensuring proactive component replacement.<br><br>Disconnected battery notification<br>Warns when a battery is not available to provide backup power.<br><br>Audible alarms<br>Provides notification of changing utility power and UPS power conditions<br><br>Generator compatible<br>Ensures clean, uninterrupted power to protected equipment when generator power is used.<br><br>Cold-start capable<br>Provides temporary battery power when the utility power is out.<br><br>Frequency and voltage regulation<br>Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.<br><br>Power conditioning<br>Protects connected loads from surges, spikes, lightning, and other power disturbances.<br><br>Safety-agency approved<br>Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.<br><br>Input power factor correction<br>Minimizes installation costs by enabling the use of smaller generators and cabling.<br><br>Resettable circuit breaker<br>Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)APC SRT1500RMXLI-NC. UPS topology: Double-conversion (Online), Output power capacity: 1.5 kVA, Output power: 1500 W. Serial interface type: RJ-45. Battery technology: Sealed Lead Acid (VRLA), Battery voltage: 48 V, Battery life (max): 5 year(s). Form factor: Rackmount, Product colour: Black, Cable length: 1.83 m. Width: 432 mm, Depth: 505 mm, Height: 85 mm