Argipäeviti 10:00-18:00
616 68 88
Kataloog
  • GTZ EST
  • 20160906 Швейные машинки -28% EST
  • 160809 тонеры по супер ценам EST

NOCTUA NF-A15-PWM Silent ümbris 140mm Fan

NOCTUA NF-A15-PWM Silent ümbris 140mm Fan

Tootefotod võivad olla
illustratiivse tähendusega

Tellimisel toode: 50+ tk
Tarneaeg: 3-10 tööpäeva

 

Vaata tarneviise

27.70 €

Tootja: NOCTUA
Tootekood: NF-A15 PWM
Garantiiaeg: 12 kuud


NB! Kirjelduses võib esineda ebatäpsusi või olla muus keeles. Palume võtta ühendust, kui soovite saada täiendavat lisainfot selle toote kohta eesti keeles.

Kirjeldus
Round 140mm raam koos 150mm width The NFA15 is tailormade for use on today's highend CPU coolers: While its 150mm width matches those of most highend heatsinks its 140mm height doesn't make it extend on top and thus ensures best case compatibility. The NFA15's standard 120mm mounting holes 105mm spacing also make it an ideal performance upgrade for 120mm case or CPU fans. Flow Acceleration Channels The NFA15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO raam Noctua's AAO Advanced Acoustic Optimisation frames feature integrated antivibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow which reduces tonal intake noise improves flow attachment and increases suction capacity especially in space restricted environments. Inner Surface Microstructures koos the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures flow separation from the suction side of the blades is significantly suppressed which results in reduced blade passing noise and improved airflow and pressure efficiency. SSO2 Bearing The NFA15 features the further optimised second generation of Noctua's renowned timetested SSO bearing. koos SSO2 the rear magnet is placed closer to the axis to provide even better stabilisation precision and durability. Integrated AntiVibration Pads Integrated AntiVibration Pads made from extrasoft silicone minimise the transmission of minute vibrations while maintaining full compatibility koos all standard screws and other mounting systems. Custom designed PWM IC koos SCD Supporting fully automatic PWM speed control the NFA15 PWM uses Noctua's novel custom designed NEFD1 PWM IC that integrates Smooth Commutation Drive SCD technology. By providing smoother torque impulses SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds. LowNoise Adaptor The NFA15 PWM is supplied koos a LowNoise Adaptor L.N.A. that reduces the maximum fan speed from 1200 to 900rpm. The L.N.A can be used either to run the fan at a fixed speed of 900rpm or to cap the maximum speed when using automatic PWM control. Extensive cabling options The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and the supplied 3:4 pin adaptor allows to connect the fan directly to the power supply. 6 years manufacturer's warranty Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans the NFA15 features an MTBF of more than 150.000 hours rating and comes koos a full 6 years manufacturer's warranty

Ei ole täiendavaid tooteid NOCTUA NF-A15-PWM Silent ümbris 140mm Fan


Teie ostukorvis:
kaupa pole

Makseviisid

Swedbank SEB Danske Bank

Nordea CC

TELLIMUST
TELLIMUST

Logige sisse OX.ee

E-post: Salasõna:

Unustasid salasõna?

 

Registreeruda