ИБП APC Power Saving Back-UPS RS 1500 230V CEE 7/5

<b>Specific features:</b><br><br><b>Green mode: </b>Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.<br><br><b>Audible alarms: </b>Provide notification of changing flywheel conditions<br><br><b>Battery failure notification:</b> Provides early-warning fault analysis on batteries enabling timely preventive maintenance<br><br><b>Power-saving outlets: </b> Automatically cuts power to idle equipment to conserve electricity.<br><br><b>LCD display:</b> Alpha-Numeric Display which displays system parameters and alarms.<br><br><b>Battery-protected and surge-only outlets: </b> Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment<br><br><b>Cold-start capable: </b> Provides temporary battery power when the utility power is out.<br><br><b>Hot-swappable batteries:</b> Ensures clean, uninterrupted power to protected equipment while batteries are being replaced<br><br><b>Automatic self-test: </b>Periodic battery self-test ensures early detection of a battery that needs to be replaced.<br><br><b>Adjustable voltage sensitivity: </b>Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.<br><br><b>Audible alarms:</b> Provides notification of changing utility power and UPS conditions.<br><br><b>User-replaceable batteries:</b> Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)<br><br><b>USB connectivity:</b> Provides management of the UPS via a USB port (not available on all models).<br><br><b>Transformer-block spaced outlets: </b> Protect equipment with input transformer blocks without blocking access to other receptacles.<br><br><b>Boost and Trim Automatic Voltage Regulation (AVR):</b> Gives higher application availability by correcting low and high voltage conditions without using the battery<br><br><b>Automatic Voltage Regulation (AVR)</b>: Gives higher application availability by correcting low and high voltage conditions without using the battery.<br><br><b>Intelligent battery management</b>: Maximizes battery performance, life, and reliability through intelligent, precision charging.<br><br><b>Building Wiring Fault Indicator: </b>This LED informs users of potentially dangerous wiring problems in the wall circuit.<br><br><b>Adjustable voltage sensitivity: </b>Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.<br><br><b>Automatic Voltage Regulation (AVR):</b> Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.<br><br><b>Battery fault detection: </b>Monitors room and individual battery temperature changes for early detection of thermal runaway, shorted cells, open circuit, and bad battery.<br><br><b>Battery-protected and surge-only outlets:</b> Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.<br><br><b>Safety-agency approved:</b> Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. <br><br><b>Power conditioning</b>: Protects connected loads from surges, spikes, lightning, and other power disturbances. <br><br><b>Audible alarms: </b>Provides notification of changing utility power and UPS conditions. <br><br><b>Automatic restart of loads after UPS shutdown:</b> Automatically starts up the connected equipment upon the return of utility power. <br><br><b>Automatic self-test: </b>Periodic battery self-test ensures early detection of a battery that needs to be replaced.<br><br><b>Battery replacement without tools: </b>Allows quick, easy battery replacement. <br><br><b>LED status indicators:</b> Quickly understand unit and power status with visual indicators. <br><br><b>Cold-start capable:</b> Provides temporary battery power when the utility power is out. <br><br><b>Hot-swappable batteries:</b> Ensures clean, uninterrupted power to protected equipment while batteries are being replaced <br><br><b>Resettable circuit breakers: </b> Enables a quick recovery from overload events. <br><br><b>Transformer-block spaced outlets:</b> Protect equipment with input transformer blocks without blocking access to other receptacles. <br><br><b>User-replaceable batteries: </b> Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) <br><br><b>Adjustable voltage sensitivity: </b>Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. <br><br><b>Adjustable voltage-transfer points: </b>Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. <br><br><b>Intelligent battery management: </b>Micro-processor controlled battery charging and diagnostic testing ensures maximum battery life. APC Power Saving Back-UPS RS 1500 230V CEE 7/5. Output power capacity: 1.2 kVA, Output power: 865 W, Surge energy rating: 445 J. Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 8 h. Product colour: Black, Cable length: 1.83 m. Width: 112 mm, Depth: 380 mm, Height: 301 mm. Battery type: APCRBC124, Interface: USB, Input connection type: IEC-320 C14