CISCO VWIC3-1MFT-G703=, Wired, Ethernet, -15, roheline, hõbedane, 0 - 40, -25 - 70
NB! Kirjelduses võib esineda ebatäpsusi või olla muus keeles. Palume võtta ühendust, kui soovite saada täiendavat lisainfot selle toote kohta eesti keeles.
Cisco VWIC3-1MFT-G703=. Connectivity tehnoloogia: Wired, Interface: Ethernet. Gain: -15. Colour of product: Green, hõbedane
These paindlik interface kaardid tugi multiple integreeritud data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution The Cisco® Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) tugi data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integreeritud Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 kaardid can be reused in packet voice applications. The 2 port T1/E1 MFT VWIC3 is shown below. The Cisco MFT VWIC3 interface kaardid add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface kaardid (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM kaardid with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 kaardid tugi up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 kaardid. The Cisco MFT VWIC3 kaardid can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integreeritud services routers. The T1/E1 MFT VWIC3 kaardid tugi both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers. The Cisco MFT VWIC3 kaardid are offered in single-, dual- and quadruple-port versions, which can be used and then redeployed as network requirements change, thereby addressing several applications: - E1/G.703 data: The Cisco 1- and 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 (including structured G.703 with G.704 framing), fractional E1, and unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also tugi all the capabilities on the T1/E1 versions.